Synology E10M20-T1 10GbE and M.2 NVMe SSD Combo Adapter Card – Overview
Network
1 x 10GbE RJ-45
10GBASE-T port that also runs at 5, 2.5, 1 and 0.1 Gbps
1 x 10GbE RJ-45
10GBASE-T port that also runs at 5, 2.5, 1 and 0.1 Gbps
M.2 slots
2 x NVMe M-key
Takes 22110 or 2280 NVMe SSDs
2 x NVMe M-key
Takes 22110 or 2280 NVMe SSDs
Interface
PCIe 3.0 x8
One card adds both faster networking and SSD storage
PCIe 3.0 x8
One card adds both faster networking and SSD storage
Features
Jumbo frames, offloading
9 KB jumbo frames, checksum offload, TSO and RSS
Jumbo frames, offloading
9 KB jumbo frames, checksum offload, TSO and RSS
Compatibility
DS1819+, DS2419+, RS2423+
Plus SA, xs and rackmount Plus models; check the list
DS1819+, DS2419+, RS2423+
Plus SA, xs and rackmount Plus models; check the list
Warranty
5 Year Carry-In
Synology manufacturer warranty
5 Year Carry-In
Synology manufacturer warranty
Synology E10M20-T1 10GbE and M.2 NVMe SSD Combo Adapter Card Specifications
| General | |
|---|---|
| Brand | Synology |
| Model | E10M20-T1 |
| Part number | E10M20-T1 |
| Type | 10GbE and M.2 NVMe SSD combo adapter card for Synology NAS |
| Network | |
| Port | 1 x RJ-45 (10GBASE-T) |
| Data rate | 10 Gbps, full duplex |
| Standards | IEEE 802.3an 10Gbps, 802.3bz 2.5/5Gbps, 802.3ab Gigabit, 802.3u Fast Ethernet, 802.3x flow control |
| Features | 9 KB jumbo frames, TCP/UDP/IP checksum offload, auto-negotiation 100Mb/s to 10Gb/s, TSO, LSO, RSS, GRO, GSO |
| Storage | |
| Host bus interface | PCIe 3.0 x8 |
| M.2 slots | 2 x M-key |
| Supported SSDs | M.2 PCIe NVMe |
| Supported form factors | 22110, 2280 |
| Compatibility | |
| SA series | SA6400, SA3610, SA3600, SA3410, SA3400 |
| 26 / 25 series | RS6426xs+, RS4826xs+, RS3626xs, RS826RP+, RS826+, RS2825RP+ |
| 23 / 22 series | RS2423RP+II, RS2423RP+, RS2423+, RS822RP+, RS822+, DS3622xs+, DS2422+ |
| 21 / 20 series | RS4021xs+, RS3621xs+, RS3621RPxs, RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+, RS820RP+, RS820+ |
| 19 / 18 / 17 series | DS2419+II, DS2419+, DS1819+, RS3618xs, RS2818RP+, DS3018xs, DS1618+, RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, DS3617xsII, DS3617xs |
| DSM requirement | DSM 6.2.3-25426 or later (DSM 7.0.1 or later for RS18017xs+, RS4017xs+, RS3618xs, RS3617xs+, RS3617RPxs, DS3617xs, DS3617xsII) |
| Physical and Environment | |
| Bracket height | Low profile and full height |
| Size (H x W x D) | 71.75 x 200.05 x 17.70 mm |
| Operating temperature | 0 to 40 °C |
| Storage temperature | -20 to 60 °C |
| Relative humidity | 5% to 95% RH |
| In the Box and Warranty | |
| In the box | Synology E10M20-T1 adapter card |
| Warranty | 5 Year Synology Carry-In |
About the Synology E10M20-T1 10GbE and M.2 NVMe SSD Combo Adapter Card
The Synology E10M20-T1 combines two upgrades on one PCIe 3.0 x8 card: a 10GbE RJ-45 port and two M.2 NVMe SSD slots. It suits Synology NAS owners who want faster network transfers and SSD caching but have only one free PCIe slot. The copper port works over standard Ethernet cabling and also negotiates 5, 2.5 and 1 Gbps, while the M.2 slots take 22110 or 2280 NVMe drives. Jumbo frames and checksum offloading are supported. Compatible systems include the DS1819+, DS2419+, RS2423+ and many SA and xs models, and the card carries a 5 year Synology warranty.
